Your softener's overflow hose leads excess water out of the tank if it overfills. Not sure how to install your overflow hose? Just follow the steps below!
1. You'll need to start by locating the overflow hole in the back of your salt tank, about a quarter of the way down.
2. Insert the black grommet into the hole on the salt tank.
3. Now, push the overflow adaptor elbow into the grommet.
4. Go ahead and push your hose onto the overflow adaptor and secure it with the included hose clamp. If you need additional hose for this installation, please visit your local hardware store for the necessary 3/8" inside diameter tubing.
5. Lastly, the overflow hose is gravity-fed and should be routed directly downward into a nearby floor drain. If no floor drain is available, simply run the hose into a 5-gallon bucket next to the softener. You're done!
Please let us know if this article was helpful by voting below.