There are some ways in which you can customize the programming for your water softener. Take a look at the options below and check out the articles to learn more.
Salt Efficiency
Check out our article 'E' Efficiency Setting to learn what the setting does and how to activate it.
Clean Feature (on select models)
Check out our article How to Activate the Clean Feature to learn what it is and how to turn it on.
Maximum Days Between Recharges
Check out our article How to Set the Maximum Days Between Recharges to learn why it's important and how to program it.
97% Feature
This feature allows the softener to regenerate anytime it reaches 97% softening capacity. This means it may trigger a recharge at times other than what you have set for the 'Recharge Time'. By turning this feature ON, you may save on salt and water usage.
How to Program this Feature (click here)
1. Hold the Select button down until '000' appears, then let go. Tap the Select button until you see the display showing 'OFF' and 'Recharge'.
2. Tap the Up arrow to turn the feature on.
3. Continue tapping the Select button to return to the home screen.
Backwash and Rinse Times
The Backwash and Rinse cycles are designed to flush your resin beads of any leftover salt, hardness minerals, and debris. These times are often customized by homeowners with a water source high in iron or sediment.
How to Program Backwash/Rinse Cycles (click here)
1. Hold the Select button down until '000' appears, then let go. Tap the Select button until you see the display showing 'Add'.
2. Use the Up/Down arrows to set this Backwash feature to between 1-15 minutes.
3. Tap the Select button again to choose the Rinse cycle time. Use the Up/Down arrows here to set the duration.
4. Continue tapping the Select button to return to the home screen.
Please let us know if this article was helpful by voting below.